Enco Ceiling Fan Light Kit Adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adaptor to mount a modern LED light kit on a vintage ENCO ceiling fan, Model 1200mm from the late 1970s,…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 243
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an adaptor to mount a modern LED light kit on a vintage ENCO ceiling fan, Model 1200mm from the late 1970s, early 1980s. Might work for other models of ENCO fans.
Four metal blade ornate brass model and the reversible model. These types of ceiling fans are called the "High Breeze". Made in Bombay, India by Crompton Greaves, Sold and distributed by Encon. J-Hook is used to mount this ceiling fan to ceiling.
I used this to mount a Hampton Bay LED light kit. You'll need to remove the Edison base adaptor and wire it direct. https://www.homedepot.com/p/Hampton-Bay-11-in-Warm-and-Bright-White-Light-Universal-LED-Ceiling-Fan-Light-Kit-53701101/206359872
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
100%
Filament: Overture PETG White
Notes:
Print with the flange side down. Use supports - doesn't need much.
Installation
Insert the adaptor into the fan housing. While holding it in, drill through the three holes in the fan body into the adaptor - make sure you turn the adaptor so that none of the holes will be drilled into the two mounting bosses for the light kit.
Use 3 M4 x 10 screws and nuts to secure it. Attach light kit wires, and screw the light kit into the adaptor mount bosses using suitable screws. You might need to enlarge the holes slightly.Category: Replacement Parts