Logitech c525 mount for Prusa i3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a way I could monitor prints from other rooms in the house and I had this old c525 laying around. This mounts…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 304
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a way I could monitor prints from other rooms in the house and I had this old c525 laying around. This mounts to the z-axis motor mount by replacing the two screws with two m3 screws that are about 18mm long.
Originally there was going to be a piece of m3 threaded rod with wing nuts to lock the ball joint in place. The socket itself came out a little undersized and the lock wasn't necessary but the holes are still present.
Print Settings
Printer Brand:
RepRap
Printer:
Prusa i3 Original
Rafts:
No
Supports:
Yes
Infill:
20%
Notes:
Print both pieces laying flat.
Category: 3D Printer Accessories