One Up / Two Up Slim Bowden X Carriage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Since bowden systems don't have the motor on the carriage, I thought it would be a good idea to make it slimmer for…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Since bowden systems don't have the motor on the carriage, I thought it would be a good idea to make it slimmer for extra x-axis distance.
NOTE: X AXIS WILL HAVE TO BE INVERTED TO USE THIS.
I decided to put the belt tensioner on the bottom so I can put the mounting holes on top for more z axis travel. I included the source file for this part if anyone wants to change that.
Known Issue: The fan support may bump into the bolt that holds the right x-carriage belt bearing. I will try to update this part to prevent that.
For the extra parts, such as the fan duct, visit macattak's page and download them from there. Since this is a remix, all his parts will still work with this; I just don't want to upload parts I didn't edit or recreate from scratch.
Update: Added ubis mount. Didn't fix the issue of bumping into the bolt yet though.
Instructions
NOTE: X AXIS WILL HAVE TO BE INVERTED TO USE THIS.
Requires 2 LM8UU bearings.
Changing the orientation before printing might help with the mounts.
Category: 3D Printer Parts