Ikea Lamp Repair
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ikea hour glass shaped Lamp repair (is it called Smärrt?)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Well, time for another repair with 3D printing.
It came like it had to come - the lamp slided and the lamp shade broke through the hole which holds the lamp in the shade. Glued it survived a couple of years now but moving it around it came apart again.
To the rescue I created a stand which covers the light shades broken off part. There is also new place where the pipe (which holds the lamp holder). This repair needs 2 parts as this pipe and the attached cable are more difficult to disassemble to insert it in a simple hole.
Printed in PETG. 2 walls. 15% infill. The insert should be printed with support for better accuracy.
The outer surface is printed in fuzzy mode to make it more appealing than fdm layer lines.
My other models https://www.printables.com/@printbar_1340669/models