Hose Holder for Inflatable Kayak Pump
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A hose holder / manager for the pump that came with my inflatable kayak, a Bravo SUP4 pump for a SeaEagle Razorlite.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- GNU General Public License v3.0
The object clamps onto the main body of the pump, holds the hose on two sides, and can use an M4 screw and captive nut to secure itself.
My inflatable kayak (Seaeagle Razorlite) came with an inflation pump, a Bravo SUP4. I wanted an item to help keep the hose attached to the pump, like a bike pump, hence this design. To fit it, unscrew the black top of the pump, remove the plunger and cap (mine had a surprising amount of silicone grease in there), then rotate / slide / coax / shove the ring down until it clears the final lip. With PLA, it was moderately hard; enough I'm not worried about it coming off, despite the lack of fastener.
On my Prusa i3MK3 in quick draft mode with (cheap) Inland PLA: some roofs sagged too much, so neither the M4 screw nor the nut fit properly and the hose grabber saw a modest amount of spaghettification; however the piece is attached to the pump surprisingly well, and the hose snaps in with an appropriate amount of force, so I'm sharing the source file as-is. With a better print, an M4x16 screw should be enough, maybe a drop of locktite to secure it once it's adjusted in-place.
Printed without supports, in draft mode, rectilinear 15% infill. And it worked well enough first try O_o