Multiboard Harbor Freight/Pittsburgh T-Handle Hex Wrench Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple t-handle hex wrench holder for Multiboard designed for the 18-piece Harbor Freight/Pittsburgh hex wrench set.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 47
- Wydruki
- 1
- Wyświetlenia
- 266
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a Multiboard holder for my Harbor Freight 18-piece Pittsburgh hex wrench set. The set consists of 9 SAE size wrenches and 9 metric wrenches. This holder uses Multiboard push fit connectors to mount them to the Multiboard tiles. I modeled 3 push connectors, but after mounting them to my panels, I realized it was probably overkill and 2 is probably enough. I made a version with 2 push fit connectors to the files, but have not printed it to test the holding power.
I designed the holder so 9 wrenches are arranged in two rows with the 4 larger sizes taking up the back row and the 5 smaller sizes in the front. If you have the same set as I do, you'll need to print 2 of these; one for the SAE sizes and one for the metric sizes.
This is the set I have and what I used for this design:
PITTSBURGH SAE and Metric T-Handle Ball End Hex Key Set, 18-Piece
The large holes are about 23mm in diameter with a draft angle tapering down to 20mm. The small holes are about 16mm tapering down to 13mm. The holes are large enough so the wrenches drop in easily.
I suspect other brands will fit this holder just fine, but YMMV. It may also work for holding screwdrivers and other tools with larger handles.
STEP and Fusion F3D files included for easy remixing.