1 / 1
1.75" Magnetic Exhaust Pipe Mockup 3 into 1 Y-Fitting
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick design for mocking up a 3 way y-fitting which goes from 3x 1.75" inlets to a single 2.5" outlet.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is done by request for mocking up a 3 way y-fitting which goes from 3x 1.75" inlets to a single 2.5" outlet. It also has pockets for 18mm x 3mm magnets on both the inlet and outlet. The inlet pattern is just a compact 120deg spacing and a 3.5" radii on all bends.
This is compatible with https://www.printables.com/model/663383-175-magnetic-exhaust-pipe-mockup-system and also https://www.printables.com/model/1193676-175-magnetic-exhaust-pipe-mockup-system-with-cente