Ventilator Cover (Internal, Greenwood Select 150)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cover for the internal face of a Greenwood Select 150 axial ventilator
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This is a cover for the internal face of a Greenwood Select 150 axial ventilator. I designed and built this when the rotating slats of the external face failed, permitting uncomfortable drafts.
The cover of this particular model is 200mm x 200mm x 29.5mm.
It slides over the moulded internal face and is secured by turning the M5 20mm bolt to press against the side of the face.
Too large for the print bed of my Prusa Mk4, this model consists of four separate pieces which lock together with dovetail joints and are secured by the face plate which is superglued on.
For the fixing bolt, just drop an M5 nut down the hole provided in the wall and screw in the bolt from the outside face.
Works for me!