Hardware organizer - Ikea VINTERSAGA Pepparkakor, 300 g
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hardware organizer to be used for the Ikea VINTERSAGA Pepparkakor, 300 g
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Hi, this is an organizer to be used for the Ikea VINTERSAGA Pepparkakor, 300 g.
It is composed of 2 levels. Each container is separated from the others so you can lift them singularly for convenience.
The top part is on a tray that can be lifter showing the bottom cases at once.
The cases on the top part have a growth on the bottom that prevent them to fall/slice when you lift the tray.
For this reason the plate with such cases shall be printed with supports.
The other two plates shall be printed without supports.
The two layers of the box are composed by 8 modules.
In the slicer you can organize the plate to have single or double cases as per your preference.
Just remember that the cases on the top layer have a growth on the bottom, while the cases for the bottom layer dont have the growth. I
added my initial on the bottom, so you can remember me ;-)
