Micro fiber bucket for Skadis PegBoard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple micro fiber bucket for Skadis PegBoard with decal.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Summary
Simple bucket for micro fiber cloth storage (or whatever suits your bucket needs) for Skådis PegBoard system. I use these to wipe of plate glue with IPA.
Observe! you will need to glue the decal yourself.
General Dimensions
With all of the uploads related to the David system, you will find the general dimensions of the box modules used, so you can make your own! Fusion360 is free for personal use, so your only loss is time and a beer or two :-).
Print Configuration
- Bucket should be printed standing up.
- The bucket is a simple creatures and does not need any particular print pattern. I print mine monotonic or rectilinear.
- Organic supports are recommended from the back and for the TNUT mounting holes. You could try without and just drill out any gunk, because the supports are high up and will take up some filament. If you use supports, you should be good using supports on build plate only.
- Brim is not needed. Although, a glue stick helps with minimizing poo-poo:ed prints and loss of filament.
- For my own prints a 0.4 nozzle with <0.3mm layer height makes for the best results in terms of time vs quality (in images, .4 nozzle using .28 layer height, 3 perimeters and basically whatever standard Prusa slicer is using for the CR-6 SE).
- Generic PLA should suffice and any special filament is not needed, unless you have a cave troll in your maker space.
Mounting
All of my pegboard models is made to be used with the fantastic “Skadis T-Nut” system originally made by @6d6178:
