1 / 2
TPU feet for Prusawire and Voron V0
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a printable version of the rubber mechanical foot for my Prusawire, and created this simple model in FreeCad.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 134
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (16)Powiązane
A very simple model, i modeled it to fit a 9 mm M3 washer (DIN 9021) and the head of an M3 socket head machine screw.
Source file included in case you want to make your own adjustments.
I printed my feet using Fiberlogy FiberFlex 30D at 40% infill and three perimeters on a MK2.5S+.
NOTE: depending on your material, these feet may not hold up at higher temperatures in an enclosure, please consult the spec sheet for your material.