1 / 1
Filament Dryer PTFE Guide - Sunlu Filadryer S1 — zdjęcie 1

Filament Dryer PTFE Guide - Sunlu Filadryer S1

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A reliably way to use the Sunlu Filadryer as an active dry box while running prints. Been working great for 3+ years

Ocena
0 / 5
Polubienia
9
Pobrania
76
Wydruki
0
Wyświetlenia
463
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

This part fits inside the Sunlu Filadryer S1 drybox and acts as a nut for a PTFE guide fitting. Use of any 4mm OD nominal hose fitting should work, you may need to enlarge the hold on the drybox in order to make sure you fitting passes through and only attaches to the printed part (AKA, clearance hole).

Have been using this solution on multiple of these filament dryers without issue, made the printing process more reliable.

Generic PETG Structural profile should be sufficient. Strongly recommend using PETG or similar material for heat resistance, routinely ran filament dryer to 60° C without issue.

Tagi