Filament Dryer PTFE Guide - Sunlu Filadryer S1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A reliably way to use the Sunlu Filadryer as an active dry box while running prints. Been working great for 3+ years
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 77
- Makes
- 0
- Views
- 467
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
This part fits inside the Sunlu Filadryer S1 drybox and acts as a nut for a PTFE guide fitting. Use of any 4mm OD nominal hose fitting should work, you may need to enlarge the hold on the drybox in order to make sure you fitting passes through and only attaches to the printed part (AKA, clearance hole).
Have been using this solution on multiple of these filament dryers without issue, made the printing process more reliable.
Generic PETG Structural profile should be sufficient. Strongly recommend using PETG or similar material for heat resistance, routinely ran filament dryer to 60° C without issue.