1 / 7
M12 lens mount, 1/4" tripod mount and alternate case for Mirosoft LiveCam HD-3000 — zdjęcie 1
1 / 7

M12 lens mount, 1/4" tripod mount and alternate case for Mirosoft LiveCam HD-3000

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Making an old webcam more versatile with a M12 lens mount and regular camera-tripod mount

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
61
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Inspired by several M12 lens mounts for webcams, I recreated this in OpenSCAD. Added a ¼" tripod mount and minimal case. The adjustable lens mount allows a wide range of view angles and focussing.

Printed this with PETG. Standard 0.4mm nozzle. The M12 thread can be improved by selecting a lower layer height. 

The msWebcamM12_3msWebcamM12_3 part has a thin 0.2mm layer which has to be removed after printing. This layer allows printing without support.The msWebcamM12_3msWebcamM12_3 part has a thin 0.2mm layer which has to be removed after printing. This layer allows printing without support.

The USB ground wire is connected to a (kaptan-tape isolated) brass sheet, but this is optional. The microphone is still connected, but not very useful.

Several library modules are used, the threads are Copyright 2021 Dan Kirshner. 

Tagi