M12 lens mount, 1/4" tripod mount and alternate case for Mirosoft LiveCam HD-3000
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Making an old webcam more versatile with a M12 lens mount and regular camera-tripod mount
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 61
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
Inspired by several M12 lens mounts for webcams, I recreated this in OpenSCAD. Added a ¼" tripod mount and minimal case. The adjustable lens mount allows a wide range of view angles and focussing.
Printed this with PETG. Standard 0.4mm nozzle. The M12 thread can be improved by selecting a lower layer height.
The msWebcamM12_3msWebcamM12_3 part has a thin 0.2mm layer which has to be removed after printing. This layer allows printing without support.The msWebcamM12_3msWebcamM12_3 part has a thin 0.2mm layer which has to be removed after printing. This layer allows printing without support.
The USB ground wire is connected to a (kaptan-tape isolated) brass sheet, but this is optional. The microphone is still connected, but not very useful.
Several library modules are used, the threads are Copyright 2021 Dan Kirshner.