Small Trash compactor/Bin Basher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Everyone knows the problem: You want to throw more trash in the bin, but it's full. So I came up with this idea.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a trash compactor. You might be wondering what it's for, but it's a great must-have tool for people like me who hate pushing trash down to make more space.
I printed with this settings:
Infill: 10%
Supports/Brim(s): NO
Material: PLA,PETG,ASA,ABS… (But TPU doesn't work!)
Nozzle: 0.4mm
Temperature: 220 Celcius
Layer height: 0.2-0.5mm
Print time: About 1h30min (Anycubic Kobra 3 normal settings)
If you have any questions, feel free to contact me.If u wanna it bigger for normal sized bins I would recommend to print it at 120-130%I would be happy if you would give me a like😄.