Rifle Stock Adjustable Height Monopod - QD Mount for Magpul Style Buttstock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Monopod attaches to QD socket of a rifle stock for an additional point of support for precision bench shooting. (Airgun)
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 812
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This monopod attaches to the bottom QD socket of a rifle buttstock. In conjunction with a bipod it allows an additional single-legged point of support towards the rear of the rifle to provide more stability for precision shots.
It was specifically designed around the Umarex Notos airgun but should probably fit a number of similar m4 style stocks.
The m4 bolt knob allows lockable adjustment of kickstand angle. You can put it all the way up to stow the kickstand. *I only had socket head m4 screws on hand so I whipped up a janky m4 bolt knob that holds the screw in place (use superglue) If you have a hex head m4 screw that would work better and just download one of the many m4 bolt knobs from printables.
The kickstand screw allows you to adjust the height of the monopod to move your shooting angle up and down. The kickstand screw will thread in very tightly at first. Put a bit of 3d printer grease on the threads and work it in an out quickly with a wrench a bunch of times to loosen it up so it's easily threadable by hand. You want it tight though so theres no wobble.
Print the kickstand screw with supports in this orientation and just clean up the ball end with some sandpaper. Supports remove surprisingly clean from this geometry.
Hardware:
- M6 Nut and Screw for Monopod QD Mount
- M4 nut and screw for Monopod kickstand
- Optional rubber foot for the kickstand screw foot
Only recommend for airgun use.