DYSON_wand-base_w_23x2mm_v8
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Purchased some Jumbo Vac bags on Amazon. Couldn't find an adapter, well I designed and made one.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 12
- Wydruki
- 1
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Purchased some Jumbo Vac bags on Amazon.
Couldn't find an adapter, well I designed and made one.
I had to figure out what threads it used. Weird 23mm x 2mm pitch.
I designed 23mm x 2mm pitch threads. Then designed the Dyson vac adapter and merged the 2.
I had 4 printed iterations of the design from the threads all the way to the end.
8 total design changes and tweaks.
v8 is the final design.
Printed in PolyMaker PRO PLA (orange)
4 bottom layers
4 vertical layers
4 top layers
.2mm step height
.4mm nozzle
Bed temp 60-70 deg C
Nozzle temp 220 deg C
1st Print iteration - 23mm x 2mm thread check. Vac bag has internal threads.
2nd Print iteration - Dyson adapter sizing
3rd Print iteration - Almost final part with thread shield / dead stop. Threads printed down on the bed with the dead stop. Custom organic supports for the Dyson collar lock overhang. Tweaked the thread a little larger diameter, and moved the Dyson lock collar up higher.
4th Print iteration - Final part with thread shield / dead stop. Threads printed down on the bed with the dead stop. Custom organic supports for the Dyson collar lock overhang. (Dyson lock collar in the correct spot)
