DYSON_wand-base_w_23x2mm_v8
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.43 – €2.97 net (excluding VAT)
For file: DYSON_wand-base_w_23x2mm_v8_sliced_0.4n_0.2mm_PLA_COREONE_1h55m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.70 excluding VAT (range midpoint).
- Weight reported by the author
- 50 g
- Print time reported by the author
- 1.92 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Purchased some Jumbo Vac bags on Amazon. Couldn't find an adapter, well I designed and made one.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 12
- Makes
- 1
- Views
- 100
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
Purchased some Jumbo Vac bags on Amazon.
Couldn't find an adapter, well I designed and made one.
I had to figure out what threads it used. Weird 23mm x 2mm pitch.
I designed 23mm x 2mm pitch threads. Then designed the Dyson vac adapter and merged the 2.
I had 4 printed iterations of the design from the threads all the way to the end.
8 total design changes and tweaks.
v8 is the final design.
Printed in PolyMaker PRO PLA (orange)
4 bottom layers
4 vertical layers
4 top layers
.2mm step height
.4mm nozzle
Bed temp 60-70 deg C
Nozzle temp 220 deg C
1st Print iteration - 23mm x 2mm thread check. Vac bag has internal threads.
2nd Print iteration - Dyson adapter sizing
3rd Print iteration - Almost final part with thread shield / dead stop. Threads printed down on the bed with the dead stop. Custom organic supports for the Dyson collar lock overhang. Tweaked the thread a little larger diameter, and moved the Dyson lock collar up higher.
4th Print iteration - Final part with thread shield / dead stop. Threads printed down on the bed with the dead stop. Custom organic supports for the Dyson collar lock overhang. (Dyson lock collar in the correct spot)
