1 / 2
16x16 drone skid with steel ball (1/4 inch) whole
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the 16x16 skid, removed a little material at the sides just because and also removed two of the…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 456
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of the 16x16 skid, removed a little material at the sides just because and also removed two of the screw things, this is so you only use two screws to fix the skids to the arm.
Added a 1/4 inc sphere whole so a steel ball can fit and do cool skids
After print just force the steel balls into the hole, they should go easy and won't come out, tested it.
Category: R/C Vehicles