1 / 1
HSW All-in-One Solder Sucker Mount (Also holds gluesticks)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
All-in-one meaning print in place, no support, no extra hardware needed. Just ready to go.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 100
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
Print in place, no supports needed. Works great in PLA, PLA Silk, and PETG.
The inner diameter of the hole is 20mm. Designed to hold a standard cheapo solder sucker with a little bit of play. If your tolerances are tight, this will also fit an elements glue stick very well.