Voron AB Belt Installation Clamp - Paranoia Edition
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clamp to help with belt installation and toolhead maintanence
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 393
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
Weve all been there before. Something on your toolhead broke, you want that shiny new CNC mount or just swap out the entire well functioning thing for something new and exciting? But re-tuning the belts? Nah, miss me with that…
The existing belt clamp looks good, but half of it is loaded in tension when your clamping it down and I dont fully trust that layer adhesion to not give way right after I pull the mount off.
So I remixed it to fit M3x50 screws through the entire body so you can really crank that thing down hard. Also while at it, I added some belt teeth from the stealthburner mount and another hole at the back to optionally hard-mount the clamp to the extrusion with some M5x10 screws. It is probably overkill by a long shot, but this thing aint going nowhere!
You need:
- Print 2x of each model in standard Voron settings, preferrably in PETG or ABS (Use random seam for maximum strength)
- 4x M3x50 Screws (M3x45 should barely work too)
- 4x M3 Washer and Nuts
- Optional: 2x M5x10 Screws + 2x M5 Drop-In T-nuts