1 / 2
GeckoBowl — zdjęcie 1
1 / 2

GeckoBowl

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

📜 Description:

This 3D model is designed especially for Crested Geckos (Correlophus ciliatus), also known as banana-eaters.
The shape and size are optimized for serving fruit-based diets or crested gecko meal replacements such as Repashy, Pangea, etc.

✅ Features:

Smooth inner walls for easy cleaning

Rounded edges for pet safety

Optional wall mount or stand compatibility

Fits standard 3–5 g portions

⚙ Printing Recommendations:

Material: PLA (non-toxic, eco-friendly)

Layer height: 0.16–0.2 mm

Infill: 20–30%

Print temperature: 200–210 °C

Bed temperature: 60 °C

Supports: Not required (depending on model shape)

⚠ Pet Safety Tips:

Use pure PLA without pigments or additives, or certified eco/food-safe PLA

After printing, wash thoroughly with warm water and mild soap

Avoid boiling water or high heat — PLA can deform above 50 °C

Optionally, coat the surface with a thin layer of food-safe epoxy or varnish for full protection

💡 Pro Tip:

Keep it out of direct sunlight to prevent warping.
You can also make a double version — one side for fruit mix, one for calcium or insects.📜 Description:

This 3D model is designed especially for Crested Geckos (Correlophus ciliatus), also known as banana-eaters.
The shape and size are optimized for serving fruit-based diets or crested gecko meal replacements such as Repashy, Pangea, etc.

✅ Features:

Smooth inner walls for easy cleaning

Rounded edges for pet safety

Optional wall mount or stand compatibility

Fits standard 3–5 g portions

⚙ Printing Recommendations:

Material: PLA (non-toxic, eco-friendly)

Layer height: 0.16–0.2 mm

Infill: 20–30%

Print temperature: 200–210 °C

Bed temperature: 60 °C

Supports: Not required (depending on model shape)

⚠ Pet Safety Tips:

Use certified eco/food-safe PLA

After printing, wash thoroughly with warm water and mild soap

Avoid boiling water or high heat — PLA can deform above 50 °C

Optionally, coat the surface with a thin layer of food-safe epoxy or varnish for full protection

💡 Pro Tip:
You can also make a double version — one side for fruit mix, one for calcium or insects.

Tagi