1 / 2
GeckoBowl — image 1
1 / 2

GeckoBowl

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Model information

Category
Pets
License
Creative Commons — Attribution — Noncommercial — Share Alike

📜 Description:

This 3D model is designed especially for Crested Geckos (Correlophus ciliatus), also known as banana-eaters.
The shape and size are optimized for serving fruit-based diets or crested gecko meal replacements such as Repashy, Pangea, etc.

✅ Features:

Smooth inner walls for easy cleaning

Rounded edges for pet safety

Optional wall mount or stand compatibility

Fits standard 3–5 g portions

⚙ Printing Recommendations:

Material: PLA (non-toxic, eco-friendly)

Layer height: 0.16–0.2 mm

Infill: 20–30%

Print temperature: 200–210 °C

Bed temperature: 60 °C

Supports: Not required (depending on model shape)

⚠ Pet Safety Tips:

Use pure PLA without pigments or additives, or certified eco/food-safe PLA

After printing, wash thoroughly with warm water and mild soap

Avoid boiling water or high heat — PLA can deform above 50 °C

Optionally, coat the surface with a thin layer of food-safe epoxy or varnish for full protection

💡 Pro Tip:

Keep it out of direct sunlight to prevent warping.
You can also make a double version — one side for fruit mix, one for calcium or insects.📜 Description:

This 3D model is designed especially for Crested Geckos (Correlophus ciliatus), also known as banana-eaters.
The shape and size are optimized for serving fruit-based diets or crested gecko meal replacements such as Repashy, Pangea, etc.

✅ Features:

Smooth inner walls for easy cleaning

Rounded edges for pet safety

Optional wall mount or stand compatibility

Fits standard 3–5 g portions

⚙ Printing Recommendations:

Material: PLA (non-toxic, eco-friendly)

Layer height: 0.16–0.2 mm

Infill: 20–30%

Print temperature: 200–210 °C

Bed temperature: 60 °C

Supports: Not required (depending on model shape)

⚠ Pet Safety Tips:

Use certified eco/food-safe PLA

After printing, wash thoroughly with warm water and mild soap

Avoid boiling water or high heat — PLA can deform above 50 °C

Optionally, coat the surface with a thin layer of food-safe epoxy or varnish for full protection

💡 Pro Tip:
You can also make a double version — one side for fruit mix, one for calcium or insects.

Tags