Tombstone Stakes Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I went through repairing our tombstones and decided I needed a better solution for staking them down
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Standard Digital File License
The tombstones for Halloween have gotten cheaper and thinner. I went through repairing our tombstones and decided I needed a better solution for the stakes that would make the tombstones last longer and be secure. Especially since we add paint and EL wire to our tombstones. These use a compliant hole to adapt to the rod sizes. This also gives some flex for wind and such.
Printing: I used PETG for the sun/weather and Extra Rough Draft since they are functional only :)
Usage: I use 2 per stake. Smaller tombstones I only used one stake and larger tombstones I used 2 (4 holders).
Stakes: I made this to adapt to 6mm-8mm rods. I buy the steel rods from the big box store and then cut them down to size.
Attaching: There is a glue channel on the back and I attached them with hot glue to the back and they have not come off. If you have problems you may want to switch to a good adhesive glue stick and/or high-temp.