Airbrush booth furnace filter holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
12x12x1 furnace filter holder for custom airbrush booth
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
A furnace filter holder for creating an airbrush booth using an Ikea Cabinet and a 12x12x1 furnace filter.
The filters I used are these: https://www.amazon.com/dp/B07FNQRDNK?th=1
The cabinet is from Ikea: https://www.ikea.com/us/en/p/besta-frame-white-stained-oak-effect-10247379/
On the back I used this flange: https://www.amazon.com/dp/B0000223Y8
Notably these filters are not actually 12" x 12" x 1", but are actually 11.81" x 11.81" x 0.81", and this housing is designed to fit them snugly
The filter housing has premade holes that will line up with the flange, and has holes for ¼" magnets to hold the cover in place, but I found the friction fit to be sufficient.
You will need to print 4 of each piece and then glue them together