Airbrush booth furnace filter holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
12x12x1 furnace filter holder for custom airbrush booth
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 11
- Makes
- 0
- Views
- 131
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
A furnace filter holder for creating an airbrush booth using an Ikea Cabinet and a 12x12x1 furnace filter.
The filters I used are these: https://www.amazon.com/dp/B07FNQRDNK?th=1
The cabinet is from Ikea: https://www.ikea.com/us/en/p/besta-frame-white-stained-oak-effect-10247379/
On the back I used this flange: https://www.amazon.com/dp/B0000223Y8
Notably these filters are not actually 12" x 12" x 1", but are actually 11.81" x 11.81" x 0.81", and this housing is designed to fit them snugly
The filter housing has premade holes that will line up with the flange, and has holes for ¼" magnets to hold the cover in place, but I found the friction fit to be sufficient.
You will need to print 4 of each piece and then glue them together