Thorlabs rotation stage adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The tripod mount was getting tipped over and was difficult to precisely locate and rotate, so I printed out an adapter…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
The tripod mount was getting tipped over and was difficult to precisely locate and rotate, so I printed out an adapter that grips the tripod tube (minus the tripod legs) and mounts to a ThorLabs PR01/M rotation stage.
I included the F360 design so you can adapt.
Print Settings
Printer:
jjt Makerslide
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
.15
Notes:
I print with a high resolution STL output model and 0.15 mm layer because of the threads on my adapter. If you are just printing the plate you probably won't need this.
How I Designed This
Design
I pulled the dimensions of the rotation stage direct from ThorLabs website.
I measured the dimensions of the existing tripod mount. I was able to reuse the original cap with the printed threads.
Category: Camera