1 / 2
Angled Drop Target; Chicago Gaming Company, Pulp Fiction — zdjęcie 1
1 / 2

Angled Drop Target; Chicago Gaming Company, Pulp Fiction

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Angled Drop Target; Chicago Gaming Company, Pulp Fiction

Ocena
0 / 5
Polubienia
3
Pobrania
21
Wydruki
0
Wyświetlenia
96
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

Chicago Gaming Company, Pulp Fiction – Planetary Pinball Supply, “Angled Drop Target Black Rev. 2 Pulp Fiction”

----

This is designed as a replacement for the Chicago Gaming Company Pulp Fiction “wide” wedge/"angled" drop target (~0.47" wide, vs 0.375"), as used for the pawn shop gimp drop targets.  These have a wider rollover wedge, as like some Stern targets (e.g. 545-6305-00), but use the switch mechanism of the Williams style drop targets (e.g. wedge: 03-8750, 03-8033; flat: 03-8749, 03-8036).

It is two pieces; print the actuator piece and press/glue it into the desired actuator slot: top for Stern, bottom for Williams/Chicago Gaming.

I found it easiest to “cut” the target in the slicer, on either long flat face, and use connectors to glue the wedge that remains on – overall, three pieces to assemble.  You could probably also print it on its side.

Admittedly this is a crude, quick attempt, from design/draft to printing.  However, it seems to be working so far.

Tagi