Angled Drop Target; Chicago Gaming Company, Pulp Fiction
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Angled Drop Target; Chicago Gaming Company, Pulp Fiction
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 22
- Makes
- 0
- Views
- 101
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- GNU General Public License v3.0
Chicago Gaming Company, Pulp Fiction – Planetary Pinball Supply, “Angled Drop Target Black Rev. 2 Pulp Fiction”
----
This is designed as a replacement for the Chicago Gaming Company Pulp Fiction “wide” wedge/"angled" drop target (~0.47" wide, vs 0.375"), as used for the pawn shop gimp drop targets. These have a wider rollover wedge, as like some Stern targets (e.g. 545-6305-00), but use the switch mechanism of the Williams style drop targets (e.g. wedge: 03-8750, 03-8033; flat: 03-8749, 03-8036).
It is two pieces; print the actuator piece and press/glue it into the desired actuator slot: top for Stern, bottom for Williams/Chicago Gaming.
I found it easiest to “cut” the target in the slicer, on either long flat face, and use connectors to glue the wedge that remains on – overall, three pieces to assemble. You could probably also print it on its side.
Admittedly this is a crude, quick attempt, from design/draft to printing. However, it seems to be working so far.