Slide Cutter for Swanson Savage SVE Series No Slip Straight Edges
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This cutter slides down a Swanson Savage SVE Series No Slip Straight Edges to make clean, straight, cuts.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I created this cutter as a cost effective way to cut down long sheets of photo paper, but can see being useful for other things as well. The model does not hang below the straight edge to protect the paper. The blade will ride a couple mm from the guide to not have them wear on each other. Account for this when lining up your cuts. I made it for the 72" model, but would assume the other sizes are the same profile, but no guarantees!
Model was printed in pet g with auto trees on the end closest to the exposed blade point (I'd call this left and I made it, so left).
I used an m3 threaded insert to hold the blade. I drilled a slightly smaller hole than the insert, put the screw in the insert, and shoved it in. Seems to hold find for this. Used a motherboard screw until my set arrives.