1 / 3
Slide Cutter for Swanson Savage SVE Series No Slip Straight Edges — image 1
1 / 3

Slide Cutter for Swanson Savage SVE Series No Slip Straight Edges

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This cutter slides down a Swanson Savage SVE Series No Slip Straight Edges to make clean, straight, cuts.

Rating
0 / 5
Likes
4
Downloads
17
Makes
0
Views
215
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

I created this cutter as a cost effective way to cut down long sheets of photo paper, but can see being useful for other things as well.  The model does not hang below the straight edge to protect the paper.  The blade will ride a couple mm from the guide to not have them wear on each other.  Account for this when lining up your cuts.  I made it for the 72" model, but would assume the other sizes are the same profile, but no guarantees!

Model was printed in pet g with auto trees on the end closest to the exposed blade point (I'd call this left and I made it, so left).

I used an m3 threaded insert to hold the blade.  I drilled a slightly smaller hole than the insert, put the screw in the insert, and shoved it in.  Seems to hold find for this.  Used a motherboard screw until my set arrives.

Tags