1 / 2
Voron V0 Camera Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
OV5640 USB Camera mount for 1515 extrusions
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 1
- Wyświetlenia
- 160
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This mount is designed for the OV5640 USB Camera. I use the 120 degree one.
It is compatible with every tool head, because the lens sits behind the extrusion.
The camera is meant to make as much contact as possible with the back extrusion to use it as a heat sink. Without a heat sink, the sensor overheats and the camera quality drops off massively.
For printing, you can use the Voron parameters:
4 walls
40% infill
0.4mm nozzle
0.2mm layer height
no supports
For mounting use:
1 M3 Nut
1 M3x8 Screw
A CAD File is provided if you want to change anything.