1 / 1
Parametric pantyliner box
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lightweight box that holds up to four different sets of pantyliners in a small space
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a leightweight box which holds up to four different sets of pantyliners in a small space. Designed based on specifications by my better half.
I printed with the following settings:
- PLA
- 0.4mm nozzle
- 0.42mm line width (hence the 0.84mm walls)
- 0.2mm layer height
- wall loops: 1
- infill: 0% (you probably might want to add infill if you opt for a greater thickness of the parametric walls [which is unnecessary in my opinion])
- Ironing type: all top surfaces (or you can instead add a modifier which only covers the bottom and set ironing mode there, in order to avoid ironing of the walls' topmost surface)
- Fuzzy skin
- Contour and hole
- generator mode: displacement (extrusion has never worked for me so far)
- noise type: Perlin
- point distance: 0.3mm
- thickness: 0.2mm
- feature size: 0.3mm
- Noise Octaves: 4
- Noise persistence: 0.6
With ironing and fuzzy skin, print time can easily exceed 10 hours. Otherwise it should only need around 2 hours. Uses around 70g of filament with the default settings.