1 / 1
Parametric pantyliner box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lightweight box that holds up to four different sets of pantyliners in a small space
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 67
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a leightweight box which holds up to four different sets of pantyliners in a small space. Designed based on specifications by my better half.
I printed with the following settings:
- PLA
- 0.4mm nozzle
- 0.42mm line width (hence the 0.84mm walls)
- 0.2mm layer height
- wall loops: 1
- infill: 0% (you probably might want to add infill if you opt for a greater thickness of the parametric walls [which is unnecessary in my opinion])
- Ironing type: all top surfaces (or you can instead add a modifier which only covers the bottom and set ironing mode there, in order to avoid ironing of the walls' topmost surface)
- Fuzzy skin
- Contour and hole
- generator mode: displacement (extrusion has never worked for me so far)
- noise type: Perlin
- point distance: 0.3mm
- thickness: 0.2mm
- feature size: 0.3mm
- Noise Octaves: 4
- Noise persistence: 0.6
With ironing and fuzzy skin, print time can easily exceed 10 hours. Otherwise it should only need around 2 hours. Uses around 70g of filament with the default settings.