BMW 68mm wheel cap with integrated removable supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed the original monochrome model, added some depth and model with integrated removable supports.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 161
- Wydruki
- 1
- Wyświetlenia
- 513
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- GNU General Public License v3.0
Pattern depth is 1mm, dual-colour print is possible with different base colour and contrasting top colour. Use auto-orient for printability. Do not print it out of PLA due to the heat after driving and the sun. ABS/ASA are good options, PETG parts will fall out if there's something wrong with brakes getting stuck for example (ask how I know).
NOTE: This is still work in progress. I uploaded the model without printing it first and it turned out the supports were too close to main piece, sticking together and supports were impossible to remove (printed with ASA-GF). Uploaded new model with bigger gaps between the model and supports, can be removed with something sharper and flat.