1 / 3
Interlocking 50ml tube rack
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fully printed interlocking 50 ml tube rack for 7 Tubes
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 288
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- GNU General Public License v3.0
This remix is based on the original interlocking 50 ml test tube rack by @Eivydas_EA_250725, with feet modification by @Razzer09.
The design has been adjusted from 10 to 7 tube slots to create a symmetrical and more compact layout while keeping the same interlocking assembly concept.
Printed in PLA, as in the original model.
Assembly instructions:
- Ensure the rectangular leg ends face downward.
- Hold the bottom plate in your palm and cover three assembly slots with your fingers.
- Insert three legs into the slots while holding them in place.
- Add the middle plate, then insert the remaining leg.
- Finish by attaching the top plate—insert one side between two legs, then gently spread the other two legs to snap it in.
Credit to @Eivydas_EA_250725 for the original design and @Razzer09 for the stabilized base version.