Garage Shield for Genie pre 2012
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you don't know how easy it is to open a garage door with a typical garage door opener you need to google it. This…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 281
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
If you don't know how easy it is to open a garage door with a typical garage door opener you need to google it. This shield only works on older Genie doors so look at the stl and Fusion360 drawings to make sure it's suitable for your garage door cariage. Print it out of whatever you want and at least take the handle off of the rope hanging down. I have a short little piece of wire hanging down, on my daughter I just removed the cord all together and hung a little wire loop next to the door.
Fusion360 files: http://a360.co/2wrK79Z
A common fix is to just use a tie strap but any good thief could make a loop in his coat hanger and pull it open.
Print Settings
Printer Brand:
LulzBot
Printer:
TAZ 5
Rafts:
Yes
Supports:
No
Resolution:
.2
Infill:
30
Category: DIY