1 / 2
Shave Brush and Razor Srtand - 5 Brushes and 5 Razors — zdjęcie 1
1 / 2

Shave Brush and Razor Srtand - 5 Brushes and 5 Razors

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is designed to hold 5 razors (4 Regular and 1 larger) along with 5 various brushes, 2 PAA cubes, and a shavette

Ocena
0 / 5
Polubienia
8
Pobrania
18
Wydruki
0
Wyświetlenia
161
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial

This is one of my first designs, so it may need work! 

  • Brush Holes
    • 3 of the brush holes are 26mm,
    • The leftmost one is 33.5mm for a bigger brush.
    • The rightmost brush hole is 25mm, 
    • They are designed to hold and grip 30mm 26mm and 24mm brushes.
  • Razor Holes
    • 4 razor holes are 11mm to hold standard razors.
    • Rightmost hole is 16mm to hold bigger razors (it will fit a Merkur Futur)

The square bottom cutouts are designed to hold the PAA shave cube base you can buy from Phoenix. 

The other cutout is for anything, but i made it to hold my shavette. 

The feet print separate, but I put .2mm indents on the base for them to sit in. These indents do not need supports. 

I printed this with PLA, and printed them on their backs (the 3 bars)

 I used tree supports for that. 

z recommend a big brim (10mm for me) and make sure your plate is ready, i ended up needing some adhesion. The whole print took about 25 hours, but i went slow using a .4mm nozzle with .2 layer height. I did 22% infill using Gyroid and 3 wall loops. Designed in Fusion 360

Tagi