Shave Brush and Razor Srtand - 5 Brushes and 5 Razors
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is designed to hold 5 razors (4 Regular and 1 larger) along with 5 various brushes, 2 PAA cubes, and a shavette
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 18
- Makes
- 0
- Views
- 157
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
This is one of my first designs, so it may need work!
- Brush Holes
- 3 of the brush holes are 26mm,
- The leftmost one is 33.5mm for a bigger brush.
- The rightmost brush hole is 25mm,
- They are designed to hold and grip 30mm 26mm and 24mm brushes.
- Razor Holes
- 4 razor holes are 11mm to hold standard razors.
- Rightmost hole is 16mm to hold bigger razors (it will fit a Merkur Futur)
The square bottom cutouts are designed to hold the PAA shave cube base you can buy from Phoenix.
The other cutout is for anything, but i made it to hold my shavette.
The feet print separate, but I put .2mm indents on the base for them to sit in. These indents do not need supports.
I printed this with PLA, and printed them on their backs (the 3 bars)
I used tree supports for that.
z recommend a big brim (10mm for me) and make sure your plate is ready, i ended up needing some adhesion. The whole print took about 25 hours, but i went slow using a .4mm nozzle with .2 layer height. I did 22% infill using Gyroid and 3 wall loops. Designed in Fusion 360
