TwisTrapp - Magnetic grip for Twistshake plates
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic adapter that locks Twistshake plates onto Stokke Tripp Trapp trays. No suction, no slips — just a solid click.
- Ocena
- 0 / 5
- Polubienia
- 2
- Wydruki
- 0
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Standard Digital File License
Does your Twistshake plate refuse to stay put on the Stokke Tripp Trapp tray because of its textured surface?
Meet the TwistTrapp - a smart, magnetic adapter that locks your baby’s plate firmly in place, no suction needed.
What It Does
The TwistLock Trapp bridges the gap between Twistshake’s suction plates and the Stokke Tripp Trapp tray, which normally prevents suction due to its subtle texture.
This adapter mounts magnetically under both the Twistshake plate and the Tripp Trapp tray, creating a strong, reliable hold that keeps everything right where it should be — even during “enthusiastic” mealtimes.
Features
Magnetic Lock System: Uses six strong 20 mm diameter neodymium magnets (N42-N52 recommended) for a powerful hold. use between 8-10mm thick ones to get the adequate retention force.
Steel Core: Houses six DIN 9021 M8 wide washers to complete the magnetic circuit and maximize grip.
Removable Inserts: Magnets and washers can easily be removed for cleaning or inspection.
Support-Free Print: Designed for clean, easy printing — no supports needed.
Food-Safe Materials: Print the main bodies in PETG, PP, or another food-contact-safe filament for best results. The washer and magnet holders should be printed in TPU for the best fit
Snap Fit: Parts align and seat precisely for a snug, satisfying fit.
Assembly
Print both parts of the TwistLock Trapp.
Press-fit six M8 wide washers (DIN 9021) into the lower recesses. Cover with the washer caps
Insert the six Ø 20 mm neodymium magnets (N42-N52 recommended) I bought these and they worked great ONE AT A TIME into the matching cavities. when inserted the magnet cover it with the magnet cap to prevent accidentally pinching your finger when inserting the next magnet.
Place the magnet holder in the bottom of tray with the lines marking the rib facing the seat guard on which the tray mounts.
Twist the plate holder into position in the bottom of the plate.
Place the plate on the tray and feel the magnetic click!
Cleaning
Magnets and washers can be removed in seconds to make cleaning simple and hygienic.
Always hand-wash and avoid dishwashers to preserve magnet strength and prevent corrosion.
Safety Note
This design is intended for responsible adult use.
Depending on the microwave oven the washers inside the plate holder could heat up. warming the food with the plate holder installed is done at your own responsibility.
Keep loose magnets and metal parts away from children — they are not toys and can be dangerous if swallowed.
Revisions
2025-10-17: Original release
2026-02-26: Improved plate holder to make insertion easier. Improved magnet holder to improve adhesion to tray. Improved magnet cap to improve fit