1 / 2
Delta Flyer Effector LED
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted more light on my Delta Flyer, so I added a single Neopixel to the effector with a simple printed mount that uses the two holes intended for an accelerometer.
I used this LED from AliExpress
I use a tiny bit of double sided foam tape to make sure the LED is secure in there as the mount was made to be a little forgiving when it comes to wiring and different LED types..
Prints without supports.
To mount it use 2xM3x6 screws.
If you have the LDO kit, I have made an updated config section you can paste in to your config.
Like my work? Support me on Ko-fi!