1 / 2
Delta Flyer Effector LED
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
All the RGB
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 40
- Makes
- 2
- Views
- 296
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I wanted more light on my Delta Flyer, so I added a single Neopixel to the effector with a simple printed mount that uses the two holes intended for an accelerometer.
I used this LED from AliExpress
I use a tiny bit of double sided foam tape to make sure the LED is secure in there as the mount was made to be a little forgiving when it comes to wiring and different LED types..
Prints without supports.
To mount it use 2xM3x6 screws.
If you have the LDO kit, I have made an updated config section you can paste in to your config.
Like my work? Support me on Ko-fi!