Remix Desiccant Spool Container with a twist
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modifications of CMYK's Desiccant Spool Container with a twist
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 52
- Wydruki
- 1
- Wyświetlenia
- 232
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
CMYK did great work on his container, the rolling of the barrel is genius, saves so much time and filament.
I did, however, make a few tweaks:
* Made the slot 1 mm longer and added a chamfer to catch the tab modification below.
* Modified the tab include a catch and added a chamfer at the ends to make it just that much easier to insert.
* Enlarged the outer diameter of both the top and bottom flanges to help hold the container in the spool, using both will likely necessitate putting the cover on the container after inserting it into the spool, feel free to only one, or both. The lid alone is good for retrofitting existing containers if you glued them as I did.
These files are only my tweaks, get the original files from his post.
I printed in PETG, using -orcaslicer 3mf file in Orca Slicer with modifications for my printer and filament choices and "reload from disk" on the sheet model to pick up my changes.
I, as others have, recommend hitting it with glue to hold everything together, I used a very thin (watery) CA glue on each of the 4 tabs (top and bottom) and along the barrel tab.