Creality Spider 3 Pro Silicone Sock Mold Top Plate "degasser/reservoir"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added some height to the mold so that air bubbles can more easily leave the mold together with a "reservoir"
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 1
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Print as regular part, flat side down (theres two nubs) No support needed.
Added some height to the mold so that air bubbles can more easily leave the mold together with a "reservoir" for siliconAdded some height to the mold so that air bubbles can more easily leave the mold together with a "reservoir" for silicone.
During my curing i saw air bubbles that kept forming on the surface. So I made a vibratory pad for it that can be found here: https://www.printables.com/model/1437532-vibratory-base-for-38x38-mouldhttps://www.printables.com/model/1437532-vibratory-base-for-38x38-mould.
However every time a bubble would go up, i had to top it up with some more silicone. So what i did was extend the top plate, made the hole bigger and added a place for silicone to sit and flow down.
What should happen now is that air bubbles that vibrate away go up. And the reservoir should top it up on its own, assisted by the vibration. You use a little bit more silicone, but its worth it. The bigger hole also makes it easier for more common types of a syringe to be inserted. About 10ML of silicone i required to fill it up twice so 5ml each.
Use 2 part silicone high temp resistance. Not RTV thats in a tube it WILL stick.
Original: https://www.printables.com/model/1097996-creality-spider-3-pro-silicone-sock-moldhttps://www.printables.com/model/1097996-creality-spider-3-pro-silicone-sock-moldAdded some height to the mold so that air bubbles can more easily leave the mold together with a "reservoir" for siliconAdded some height to the mold so that air bubbles can more easily leave the mold together with a "reservoir" for silicone.
During my curing i saw air bubbles that kept forming on the surface. So I made a vibratory pad for it that can be found here:
However every time a bubble would go up, i had to top it up with some more silicone. So what i did was extend the top plate, made the hole bigger and added a place for silicone to sit and flow down.
What should happen now is that air bubbles that vibrate away go up. And the reservoir should top it up on its own, assisted by the vibration. You use a little bit more silicone, but its worth it. The bigger hole also makes it easier for more common types of a syringe to be inserted. About 10ML of silicone i required to fill it up twice so 5ml each.
Use 2 part silicone high temp resistance. Not RTV thats in a tube it WILL stick.
Original:
Also added a new STL that has to all be printed, it keeps the holes on the left closed so its more rigid as i have no wires coming out of there. If you need it on the right, mirror it.