316 modeli
2nd variation of my original twisted planter. This time the planter is 270 degrees twisted compared to the original 60 degrees. A 3D planter with an integrated water reservoir. So that the planter can store acces water when you give the…
Wydruk około 9,32 €–11,39 € nettoWstępna wycena jednego wariantu
A 3D planter with an integrated water reservoir. So that the planter can store acces water when you give the plant too much water without drowning the plant. Thanks to the reservoir the plant will be able to get the water in when he needs…
I really do love this thing. Florida has a lot of flies. About 6 months after purchasing “it broke.” You know, as in, “no one knows who did it they just found it like that.” I've been keeping it attached with duct tape like a peasant. Now…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
With this tool, the oil change can finally be done without a big mess. Simply loosen the drain plug of the oil filter a little with a ratchet, then completely unscrew the screw with the printed special tool. The oil is completely…
Wydruk około 2,74 €–3,35 € nettoWstępna wycena jednego wariantu
Easy to use 3 piece print with attachable water reservoir and removable seedling planters for drainage/replanting.
Wydruk około 6,15 €–7,52 € nettoWstępna wycena jednego wariantu
This model is an insert for flowerpots that lift your plant, ideal to create a water reservoir, improve the drainage of your used substrate or levelling your plant in an oversized pot. For smaller size variation feel free to use the…
Wydruk około 0,89 €–1,08 € nettoWstępna wycena jednego wariantu
It is underground water reservoir for plants. I have been using a similar solution for years. But previously i have used hot glue with real funnel ;-) Now i have 3d printer so i have designed fast to print and cheap version, all in one.…
Wydruk około 1,91 €–2,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple vertical stand for holding an EKWB EK-Quantum Kinetic TBE D5 upright while using it on a workbench or table. It should work with any D5-based EK-Quantum Kinetic pump/reservoir without any issues. Also created a radiator…
Wydruk około 6,76 €–8,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replaced the printed tank part with a coke or like sized can. Sp[ray painted it white. Cut out and peeled the logo from a couple of Coke Zero 16 oz bottles, and attached to can with stick glue. The top is sized to snap onto a coke can.…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena jednego wariantu
This is a case for the Medtronic insulin pumps commonly used in DYI closed loop systems. My son is a type 1 diabetic and sometimes the insulin reservoir would come loose from the pump. The manufacturer makes clips for these pumps, but…
Wydruk około 1,45 €–1,77 € nettoWstępna wycena jednego wariantu
Connect reservoir with the toilet. PETG or ASA may be better, but in white I have PLA now. Print straight pipe as many times as needed. Supports needed only for Elbow90.stl. All parts printed with brim. Update 20240201: added Elbow90_V2…
Wydruk około 16,63 €–20,32 € nettoWstępna wycena jednego wariantu
this was quest for my friend, to replace lost cap to his outdoor waist water bottle, there was not any brand, hope someone find it usefull, it had unusual (to me) pipe thread, almost one inch diameter, “O” ring fits to the bottom of the…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I use r0tring isograph technical pens, and while I love the pen, refilling the ink is almost always the harrowing experience of trying not to spill the ink when refilling the reservoir. So I designed and printed a funnel that friction…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena jednego wariantu
I use Koh-i-Noor rapidograph technical pens, and while I love the pen, refilling the ink is almost always the harrowing experience of trying not to spill the ink when refilling the reservoir. So I designed and printed a funnel that…
I use Staedtler Mars Matic technical pens, and while I love the pen, refilling the ink is almost always the harrowing experience of trying not to spill the ink when refilling the reservoir. So I designed and printed a funnel that friction…
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
Bean reservoir extension Philips 2200-5500 (Latte Go) series. Will increase capacity to approx. 500g (1/2 kg) or 1KG beans. Pre 2023 models: BEAN 1-4 : split version of the 500gr version BEAN_1_PIECE 1 : 500gr version in 1 piece…
Komori Planter | with reservoir A quiet evolution of the Kumiko planter. This is the new version of the Kumiko planter design, I wanted to explore a more understated form. With Komori Planter, I’ve moved away from the traditional footed…
To replace a broken washer fluid reservoir cap for a OPEL Astra J OPC and some other OPEL models ;-) Original Part No. 13227300 Just printed in PETG orange / black. To hold the cap down i insert two magnets (4,5mm x 1,5mm x 9,5mm). MMU…
Windshield Wiper Washer Fluid Reservoir Tank Bottle Cap (For Peugeot and other cars). Printed in TPU (230/50), without supports. Included Solidworks file for editing and customizing :) Print instructions Category: Automotive Summary…
I failed to find useable water station for bees, therefore I created this one. It's 130x130mm, with 114 hex-shaped platforms for insect to drink from. It's compatible with any PET bottle with standard top. I tested up to 0.7l big one and…
I wanted a simple storage solution for spare filament spools that utilizes the widely available IKEA Samla 22l Storage box with lid and keeps the filament dry during storage. To keep it as simple as possible, the spools can rest directly…
I created this Coolant Reservoir Cap to replace my broken one Thread: ISO M33x3 ⚠ Use PETG or a plastic that can withstand higher temperatures. BENEFITS: Fast to print Easy to use Perfect fit Designed for FDM Printing No support needed…
I have a Ford Focus 2012 (Hatchback) and after 9+ years of prolonged heat, the windshield wiper tank cap decided to disintegrate. I whipped this up it Fusion 360 and printed it in PETG. This cap may fit newer ford(s) vehicles. Update…
Update 07.01.2024: The thickness of the strap has been reduced. Now it bends easily. Created of a flexible material for Citroen C4 (2009, EP6) because I'm tired of buying plastic caps that always break. The landing size of the tank neck…
I have a Ford Focus 2012 (Hatchback) and after 5 years of prolong heat the windshield wiper tank cap decided to disintegrate. I whipped this up it Fusion 360 and printed it in PETG. This cap may fit newer ford(s) vehicles. Print…
Standard Euro E20 thread. Started with another cap but the others had issues. So I made one from scratch. Needed a vent cut out and center protrusion for factory gasket support. Need to be a bit beefier to prevent cracking of the cap.…
My neighbour lost his cap on his 106 peugeot. I design it and install it, works fine, clips good on tank The flange is too hard but you have to smooth it with a lighter. I design with an hole but dont see on print, too small so i drilled…
A replacement water reservoir cover with a place for two 58mm or 58.5mm tampers. For the Gaggia Classic Pro. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 200 Infill: 15%, doesn't really matter…
Replacement cap for my reservoir on my 2014 Sierra. I printed mine in TPU for flexibility.
Useful for pressurizing the fluid reservoir, makes bleeding or a complete brake fluid flush a breeze. Main threads should fit most European brands (at least the internet thinks so) but I have tried it successfully with several Volvo's of…
Modeled after the original cap to print a replacement for a BMW E39 from 1999. Print in heat resistant filament like ABS or PETG. Fits E30, E39, Z4, and other models. Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0.2…
To replace a broken washer fluid reservoir cap for a OPEL Astra J OPC and some other OPEL models ;-) Original Part No. 13227300 Printed in PETG The frame STL is identical to the original, only the lid has modifications.
Your mint died again because you forgot to water it… We all have been here many times. It's sad but you have to move on, speaking of moving on… Move yourself to your slicer and print this beautiful pot, i know you want it! (or at least…
My 2006 Fiesta windshield water reservoir cap just crumbled in my hand. So I decided to design and print my own. This is my third attempt: in the first one, I messed up the dimensioning a bit, second one went better and actually mounted…
3D model of a YpsoPump insulin reservoir holder — a custom-designed holder to securely store and organize YpsoPump insulin reservoirs. Features a compact and stable design with individual slots for easy access, safe handling, and…
I did a remix to be able to either replace the logo with whatever or print it with extruder 2 using another color. It worked out nicely. Also it is possible to print the cap itself with the flat top now facing the print bed. That way, it…
UPD. Infoced the version with icon. Designed a suitable and improved windshield washer reservoir cap model for BMW E30, instead of the one published by Exotechd. His design is very beautiful and concise, but unfortunately, it doesn't fit…
Print with TPU, 3 or more walls, 0.2mm layer
EDIT: Added 2 example pics with glass to demonstrate the hidden tank and the smaller tank auto-filling. I love my various ISO Stations and used similar plastic containers in college labs, but that was a long, long time ago.....and I have…
Hanger I made for drying my Camelbak Lobo 100oz/3 liter CRUX Reservoir. Print Settings Printer Brand: Monoprice Printer: Select Mini Rafts: No Supports: No Resolution: 0.21875 Infill: 22 Filament: Monoprice PLA+ Black Category: Sport &…
Washer fluid reservoir cap with griffing logo for saab 9-5 Tested on 1998 9-5, reservoir changes atleast on 2006 so this might not fit. There is two versions of this cap, one has a tighter fit and other looser. Print with supports logo…
25/02/2026 - It's been 4 years, but I've finally removed the rogue part from the underside of the model and updated the page. Apologies to anyone affected. Upgraded version of my original water reservoir cover for the Gaggia Classic Pro .…
used for holding a water-cooling reservoir
This is a remix for mounting EK-Quantum Kinetic TBE D5 pump/res combo units. It has been shortened to allow the fittings to exit the rear along with relocated mounting holes for the standard bracket. I also thickened the vertical mounting…
Did you remove your fuse box from the engine bay and are now realizing that the oem coolant reservoir was mounted to that fuse box? Here is your solution!
Simply Resized STL from the original to fit a Suzuki Splash 2014 (Probably fit swift as well)
Windshield washer fluid reservoir cap for a 2011 Volvo S40. Includes a very small vent hole in one of the portions of the icon. It fits very well on my S40. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports:…
The salt cap of Bosch (and other brands) dishwashers notoriously gets stuck because of solid salt forming below it. This spanner eases reopening the reservoir to fill with salt.
Clicks in, stays on. Print with supports Recommended materials - ABS, ASA, PETG or similar- PLA not suitable for engine bay use. Suitable substitute for 1250896 , 3M51 17632 AB etc. Tested on a Ford Galaxy Mk.II 2007
If your brake reservoirs crumple, you may be using an automotive brake fluid (dot 5.1) in your brakes. This will destroy them and many plastic things along the way. I learned the hard way. For these brakes, use mineral oil only. Hi, my…
Windshield cleaner water cup replacement. Print with TPU.
This brake reservoir cap was made for a Chrysler Pacifica, but may work with many other makes/models
Insektentränke V2 Insektentränke mit Reservoire. Marmeladenglas, "Bonne Maman", Erbeere :-), 77.60 mm Aussendurchmesser, zzgl. Gewinde. Das Gitter lässt sich mit Justierschrauben auf die richtige Höhe einstellen. Achtung, die…
This is a replacement cap for your windshield wiper fluid reservoir. Fits the 2015 Mazda3, and probably many other models of cars.
I designed an adapter for NovoRapid Penfills to more easily fill the MiniMed pump reservoir.
I found this great design from https://www.printables.com/@Nordlicht and printed it for my IKEA box. but i use 1kg loose silica gel and the openings in the lid were a little too big for it. so i made small change. sorry, it's my first…
I reverse engineered the original cap which was broken at the joint. I tested with PTFE and TPU. - PTFE has a better fit and look , but fatigue is untested. TPU fits well and will last longer. Print with 3 walls - 15% infill Supports…
-- EN version -- VAG windshield washer fluid reservoir funnel (Volkswagen, Seat, Skoda, Audi...), 40 mm diameter. Printing instructions: Print with 100% infill. No need to use support if printed upside down. If you like this item, you can…
I printed it in PLA, 0.2 layer height, 3 walls, 5 bottom/top layers and 25% infill.
Windshield washer fluid reservoir cap I made to replace the ugly blue ones that come on the cheap aftermarket reservoirs on Amazon. Similar to this one:…
I lost the cap for the windscreen wiper fluid reservoir of my Ford Focus 2011 Stationwagon, so I whipped up a new one to replace it. Probably best to print in PETG which is more resistant than PLA. Could potentially fit other reservoirs…
You can buy these guard from the UK (34€ + delivery), but it´s very expensive. So I made my own ^^ . The 3d model was only the prototyp (after two paper modells), that it fits propertly. I make it a bit stronger, so you can use it instead…
One of the reservoir caps got lost in a move and it's easy to splash water or cleaning solution when using the carpet cleaner without it. I'm still very new at making anything and this was made using TinkerCAD. I'm pleased that it's…
I needed a flat reservoir cap for my Honda Goldwing so that I could mount a phone holder on it. After I printed the first one I decided to put the Honda logo on it. Then I made one for both sides. This was designed for a 1997 Honda…
Hood mounted air reservoirs for USA Trains 1:29 scale NW2 locomotive. The tanks are 16mm polystyrene test tubes. I measured 100mm from the open end and cut off the bottom. There is a bit of a taper hence the 2 different sized caps and…
This is a cover for the brake fluid reservoir of the MT-07/FZ-07. It should also fit on the Mt-09/FZ-09.
I made this bracket for mounting an EK 200mm reservoir to a 120mm fan while using the fan pump mount. They don't include a way for you to secure their reservoirs to a fan out of the box. So I whipped this up so I could have a clean and…
Just a replacement washer fluid reservoir cap for a BMW E92. Insert included if you would like to print in a contrasting colour. Recommend printing upside-down, flat on the print surface. I know these are cheap to buy but “I can 3D print…
The design is meant to be used with M6 screws from the rack. It was originally printed in PLA, which turned out to be stronger than the original material. Update : The PLA did not withstand the stress, and I encountered difficulties…
Replacement cap for the brake/clutch system on the 4G Mitsubishi Eclipse 06-12. Mitsubishi OEM Part number is 4625A161. Apparently this will fit the Galant of the same generation. May also fit other brands/models so it may work for you…
A remix of nielsie645 's excellent replacement water reservoir cover with print-in-place hinged lid . This integrates the stand for jkim_makes ' popular WDT tool .
Das Model ist entstanden um Parkinson Patienten dabei zu Helfen das Reservoir der t:slim X2 zu befüllen, da es sehr schwer sein kann mit der Nadel den Einfüllpunkt zu treffen. Dazu wird der Tank bei eingeklappten Zustand in die eine Seite…
I love my Philips Coffee machine but only the bean reservoir to small. Therefore i created a bigger one! This thing fits the Philips EP3550 Enjoy! Please donate and don't make money of this object!! (RESPECT THE LICENSE) Print…
This is a temporary replacement cap for the brake fluid reservoir on a Mitsubishi Pajero 4th generation (Montero/Shogun). I suspect this would work for other Mitsubishi cars. I have made this out of ASA, however I believe that brake fluid…
I designed this hook and oval “thing” to thoroughly dry out your Osprey hydraulics or similar hydration reservoir. To use, blow into the bite valve to clear out the hose and then dump the remaining water out of the reservoir. Insert the…
Replacement cap for the brake fluid reservoir on a BMW E30 325iX as these are no replacements available any longer.
Print with TPU 95A.
Settings: 0,15mm layer - 0,4mm nozzle
Bouchon lave glace Peugeot 307, fermeture par aimant. A cliquer sur le tuyau du réservoir lave glace. Il faut 2 aimants d'épaisseur 2mm et diamètre 5mm. Un axe de diamètre 2mm et longueur 18mm. Print Settings Printer Brand: Creality…
I designed this extension for the bean reservoir of our Krups Evidence coffee maker so that it can take ore beans.
The following model is not an original idea, and is a clone of an extinct product no longer being produced. This hummingbird feeder uses an upside down glass bottle full of nectar as a reservoir. It's best to print the “Bottom Plate” in…
Liquid soap reservoir Mod for Karcher k7 Smart Control. Its a 3 part design and the top must be glued. It probably won't be watertight after printing so, apply varnish or epoxy resin inside and at its bottom. Requires about 15 to 20cm of…
Print “upside down”. There is a small flat area, no supports should be needed, but I would recommend printing with a decently sized brim. Should be printed in petg for food safety and strength
These models try to solve a problem with the transportation of the medical machine ResMed AirSense™ 10. The models serve as caps for the reservoir of the machine allowing to transport of said reservoir still with water, without spilling.…
The model consists of a water reservoir, a tray for the seeds and two different caps you can easily screw onto the tray. These caps either have, or don't have holes. You can choose which ones to screw on to match the water uptake with the…
This is a mount to fix a heatkiller pump/reservoir combo on a Watercool MoRa 3. You need to print one of each parts. The two bracket halves are held together by 2 M3x30 bolts. There is no hex nut needed, the thread should hold well in the…
I'm lazy, and I don't like to put my filament away. I wanted a way to keep the filaments loaded in the printer for weeks at a time without worrying about humidity, so I added a large desiccant reservoir to the box. Additionally, I moved…
This model allows mounting of the Iceman Cooler pump/reservoir combo onto the backside of the Ssupd Meshroom case. Unlike the ssupd marketing material, I chose to mount this onto the Horizontal PCI card slot by removing the existing…
My RSX came without the original bracket to hold the power steering reservoir in place. I designed this so that the reservoir will fit right into the slot similarly to the factory metal bracket. It doesn't have the “locking tab” of the…
Needed to upgrade watercooling setup for couple of my PCs and thought that why not design my own reservoir? So this is the first design and I printed couple of these using PETG and Filaflex for gaskets. Designed for immersive pump, Im…
If your brake reservoirs crumple, you may be using an automotive brake fluid (dot 5.1) in your brakes. This will destroy them and many plastic things along the way. I learned the hard way. For these brakes, use mineral oil only. Hi, my…
Allows flexibility on where the reservoir is vertically installed. The bracket can be mounted onto a 120 mm spacing fan or radiator. Print with supports for the large overhang.
An Extension for the Saeco Vienna (and ones from other brands identical in construction like Krups, Moulinex, etc.) that makes the reservoir fit about 1 kg of beans. Ideal for people that drink a lot of coffee. You can avoid using…
This model was used in the following publication: https://doi.org/10.1021/acsearthspacechem.2c00328
Tento truhlík je vhodný pro předpěstování sazenic a to i v případě že se chystáte někam odjet na delší dobu. Truhlík je na malé květináčky o průměru 5cm, například od Parkside z Lídlu ale určitě do něj můžete použít i menší, nebo si je…
Included are models of the 3 printed parts in the assembly. The purchased parts (not including desiccant beads) are as follows: Humidity sensor: https://www.amazon.com/dp/B07GNMKYCZ?psc=1&ref=ppx_pop_dt_b_product_details Screw Handle…
I designed these 5 components for the 5 gallon bucket I used as a water reservoir for my K40 laser. I wanted a way to get a good seal so the dust form other tools such as my CNC router do not contaminate the water. The holes for the water…
This can be printed without any support. My prints were done with a 0.2-0.3 Layerheight. FreeCAD was used to create the design. It was one of my first steps with FreeCAD. The source File is added. Have fun remixing it.
Set of 3 small pots with inner reservoir to prevent spills. Designed for small decorative indoor plants. A practical and original detail—perfect for your next gift. Available in 4 designs: ✅ With a base and reservoir in textured leather.…
Originally made from ABS, so you can print from the original material. Works with the original rubber seal, from the factory cup. If you don't have the seal you can cut from rubber. Printed on the bottom with tree support, and thick…
