Ford Fiesta MK6 Windshield Fluid Reservoir Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My 2006 Fiesta windshield water reservoir cap just crumbled in my hand. So I decided to design and print my own. This…
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 267
- Wydruki
- 3
- Wyświetlenia
- 890
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
My 2006 Fiesta windshield water reservoir cap just crumbled in my hand. So I decided to design and print my own.
This is my third attempt: in the first one, I messed up the dimensioning a bit, second one went better and actually mounted it on my car but not without some small adjustments and trims with a knife. The third model is the one attached with the adjustments already included. Unfortunately I didn't print the last version, and do not know for sure if the adjustments I made result in a snug fit. It may need more fine tuning but I believe it will work in the end as it is.
In the groove of the lid I installed small foam ring for better and silent contact with the neck of the water pipe.
You may fell free do edit the lid as you like :)
Print Settings
Printer Brand:
Anet
Printer:
A4
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
50
Filament: Gneric PLA Black
Notes:
I manually added ,in the slicer, the support for the lip of the lid. The rest dosn't need any support
Category: Automotive