1 / 5
Ford Fiesta MK6 Windshield Fluid Reservoir Cap — image 1
1 / 5

Ford Fiesta MK6 Windshield Fluid Reservoir Cap

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

My 2006 Fiesta windshield water reservoir cap just crumbled in my hand. So I decided to design and print my own. This…

Rating
5 / 5
Likes
19
Downloads
271
Makes
3
Views
897
Reviews
1

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution

My 2006 Fiesta windshield water reservoir cap just crumbled in my hand. So I decided to design and print my own.

This is my third attempt: in the first one, I messed up the dimensioning a bit, second one went better and actually mounted it on my car but not without some small adjustments and trims with a knife. The third model is the one attached with the adjustments already included. Unfortunately I didn't print the last version, and do not know for sure if the adjustments I made result in a snug fit. It may need more fine tuning but I believe it will work in the end as it is.

In the groove of the lid I installed small foam ring for better and silent contact with the neck of the water pipe.

You may fell free do edit the lid as you like :)

Print Settings

Printer Brand:

Anet

Printer:

A4

Rafts:

No

Supports:

Doesn't Matter

Resolution:

0.2

Infill:

50

Filament: Gneric PLA Black


Notes:

I manually added ,in the slicer, the support for the lip of the lid. The rest dosn't need any support

Category: Automotive

Tags