1 / 4
USA Trains EMD NW2 roof mounted Air Reservoirs — zdjęcie 1
1 / 4

USA Trains EMD NW2 roof mounted Air Reservoirs

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hood mounted air reservoirs for USA Trains 1:29 scale NW2 locomotive.

Ocena
0 / 5
Polubienia
9
Pobrania
106
Wydruki
0
Wyświetlenia
407
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution

Hood mounted air reservoirs for USA Trains 1:29 scale NW2 locomotive.

The tanks are 16mm polystyrene test tubes. I measured 100mm from the open end and cut off the bottom. There is a bit of a taper hence the 2 different sized caps and brackets. The piping is 14 gauge wire and Evergreen polystyrene 1/8" tube

The end caps are customized version of https://www.thingiverse.com/thing:953781

Print Settings

Printer Brand:

Printrbot

Printer: 

Printrbot Simple Metal

Rafts:

No

Supports: 

No

Resolution:

.1

Infill: 

40

Filament: 3d-Fuel Pro PLA PLA Post-Printing =============

My preferred method of preparing for paint is a layer of Squadron Green Putty, let dry and scrape with a hobby knife. Then 2 or 3 coats of Rust-Oleum Automotive 260510 2 In 1 Filler Sandable Primer (scraping/sanding in between).

Tagi