USA Trains EMD NW2 roof mounted Air Reservoirs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution
Hood mounted air reservoirs for USA Trains 1:29 scale NW2 locomotive.
The tanks are 16mm polystyrene test tubes. I measured 100mm from the open end and cut off the bottom. There is a bit of a taper hence the 2 different sized caps and brackets. The piping is 14 gauge wire and Evergreen polystyrene 1/8" tube
The end caps are customized version of https://www.thingiverse.com/thing:953781
Print Settings
Printer Brand:
Printrbot
Printer:
Printrbot Simple Metal
Rafts:
No
Supports:
No
Resolution:
.1
Infill:
40
Filament: 3d-Fuel Pro PLA PLA Post-Printing =============
My preferred method of preparing for paint is a layer of Squadron Green Putty, let dry and scrape with a hobby knife. Then 2 or 3 coats of Rust-Oleum Automotive 260510 2 In 1 Filler Sandable Primer (scraping/sanding in between).